** Myself
Add Lancard
If not driver of lan-card then install driver and buid kernel
==>sam
==>kernel
==>driver
==>take action driver
==>make new kernel and reboot
Add Fiber port
rad -q
Driver(s)
Slot Path Bus Max Spd Pwr Occu Susp Capable Max Mode
Num Spd Mode
5 0/2/0 16 N/A 33 On No N/A N/A N/A N/A
6 0/5/0 40 N/A 33 On No N/A N/A N/A N/A
7 0/1/0 8 N/A 33 On No N/A N/A N/A N/A
8 0/3/0 24 N/A 33 On No N/A N/A N/A N/A
9 0/9/0 72 N/A 33 On No N/A N/A N/A N/A
10 0/8/0 64 N/A 33 On Yes No Yes N/A N/A
11 0/12/0 96 N/A 66 On Yes No Yes N/A N/A
12 0/10/0 80 N/A 66 On Yes No Yes N/A N/A
#
#
ioscan -fnC fc
Class I H/W Path Driver S/W State H/W Type Description
=================================================================
fc 0 0/10/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channe
l Mass Storage Adapter
/dev/td0
fc 1 0/12/0/0 td CLAIMED INTERFACE HP Tachyon XL2 Fibre Channe
l Mass Storage Adapter
/dev/td1
# fcmsutil /dev/td1
Vendor ID is = 0x00103c
Device ID is = 0x001029
XL2 Chip Revision No is = 2.3
PCI Sub-system Vendor ID is = 0x00103c
PCI Sub-system ID is = 0x00128c
Topology = PTTOPT_FABRIC
Link Speed = 2Gb
Local N_Port_id is = 0x010600
N_Port Node World Wide Name = 0x50060b000022b3bb
N_Port Port World Wide Name = 0x50060b000022b3ba
Driver state = ONLINE
Hardware Path is = 0/12/0/0
Number of Assisted IOs = 518
Number of Active Login Sessions = 0
Dino Present on Card = NO
Maximum Frame Size = 2048
Driver Version = @(#) libtd.a HP Fibre Channel Tachyon
TL/TS/XL2 Driver B.11.11.12 (AR1204) /ux/kern/kisu/TL/src/common/wsio/td_glue.c
: Oct 11 2004, 14:45:41
0 comments:
Post a Comment