** Myself
HP-UX11.0 operating system installment guide
The installment needs medium and material:
HP-UX 11.0 Core OS Install/Update/Recovery compact disc (1)
HP-UX 11.0 Support Plus compact disc (1)
HP-UX 11.0 Application Software compact disc (5)
1 Before installment preparation:
Inspects the machine before the system installment various connection, through receives the machine on hub, and in guarantees each outside supposes (the magnetic tape unit. The after floppy disk array and so on) adds the electricity, then again open machine.
2 Will see on the screen:
"Processor is booting from fist availiable device
To discontinue.press any keuy within 10 seconds"
Presses the free key inside 10 seconds, after the screen will demonstrate 19 orders collections picture:
Main Menu...
Command Description
Boot [ PRI|ALT| ] Boot from specified path
……………………… ………………………
……………………… ………………………
……………………… ………………………
Main Menu: Enter command >
3. Puts in the light HP-UCX11.0cCorecOcScInstall/UPDATE/RECOVERY drives or DVD,
4. Enters orders SEA, the system to be able to inquire the hardware equipment physical way:
Main menu:Enter command >sea
(For example)
Path Number Device path Device Type
P0 8/4.5 Random access media
P1 8/4.9 Random access media
P2...
5. According to 'device path for example: 8/4.5' and in the machine front door the sign note (D250) the true fixed light drives or the DVD way,
The supposition is P1 8/4.9
Enters orders bo the p1 carriage return:
Main Menu:Enter command>bo p1
6. The system can inquire whether has to carry on alternately visits, must input n carriage return
Interact with IPL? > n
Attention: Receives possibly appears the screen additive device phenomenon, the solution method:
According to User the System key, the screen bottom appears 8 small bright blocks, most right-hand side together is
Presses the F8 key,8 bright blocks changes, including one is, presses the F5 key, enters TERMINAL the CONFIGURATIONJIEMIAN contact surface,
Value changes to EM100 TERM the MODE), then establishes according to the F1, preservation
7. System request choice installment way:
Welcome to the HP-UX installation/recovery process!
Use the key to navigate between fields, and the arrow keys
Within fields.Use the key to select an item.
Use the or to pop-up a choices list.If the
Menus are not clear, select the " Help " item for more information.
[ Install HP-UX ]
[ Run a Recovery Shell ]
[ Advance Options ]
Choice [ Install HP-UX ], carriage return continuation.
8. Screen appearance: User Interface And Media Options
Source Location Options:
[ * ] Media only installation
[ ] Media with Network enabled (allows use of SD depots)
[ ] Idnite-UX server based installation
User Interface Option:
[ * ] Guided Installation (recommand for basic installs)
[ ] Advanced Installation
The choice [ * ] Media only installation and [ * ] Advanced the Installation two items, [ * ] for select the condition, then OK.
8. Screen appearance:
Basic Software System File system Advanced
Configrations: [... ] [ Description... ]
Environments: [... ] [ HP-UX B.11.00 ]
[ Root Disk... ] □.................................
File System: [ Logical Volume Manager with VxcFs ]
[ Root Swap (MB) ]... Physical Memory (RAM) =...
[ Languages... ] □... [ Keyboards... ] [ Additional... ]
Do not have to make any revision regarding Basic in content, retention tacitly approves value.
9. Selects File System, the demonstration is as follows
(In table data only is is example, some data are abbreviated)
Basic Software System File system Advanced
Mount Dir Usages Size (MB) % used VG Name
/stand HFS 8424 vg00 [ Add ]
Primary SWAP+D --- -- ---- [ Modify ]
/ VxcFs -- -- --- [ Remove ]
Usage: [... ] VG name: [ ] Mount Dir:
Size: [ Fixed MB ] ----- Avail:------
[ Add/Remove Disks... ] [ ---Additional Task--- ]
May revise various systems document in here the spatial size
Type Filesystem kbytes used avail %used Mounted on
hfs /dev/vg00/lvol1 199381/200M 29440 150002 16% /stand
*** /dev/vg00/lvol2 199381/2048M ***** ****** **% /***
vxfs /dev/vg00/lvol3 258048/252M 152942 98537 61% /
vxfs /dev/vg00/lvol4 1048576/1024M 1357 981768 0% /home
vxfs /dev/vg00/lvol5 1048576/1024M 309329 693045 31% /opt
vxfs /dev/vg00/lvol6 512000/500M 1449 478642 0% /tmp
vxfs /dev/vg00/lvol7 1048576/1024M 530219 485960 52% /usr
vxfs /dev/vg00/lvol8 2097152/2048M 397013 1593881 20% /var
vxfs /dev/vg00/lvol9 2097152/2048M 1776350 300752 86% /sybase
According to requests to establish various documents system consistently the size with the next table:
Mount Dir L2000(MB) Usage
Primary swap xxx Swap+D
/ xxx VxFS
/stand xxx HFS
/var xxx VxFS
/usr xxx VxFS
/Tmp xxx VxFS
/Opt xxx VxFS
/home xxx VxFS
If on the screen each document system lacks the province value and the user request same, must carry on revision,
After each time revises must according to the Modify confirmation, in order to retention establishment.
The establishment finishes, GO, continues next step.
10. After that the system can prompt on the hard disk original data which will install is destroyed, elects GO, will continue.
11. This time system document installment start, the screen demonstrates,
Loading configuration utilitys...
*Starting system configuration...
*…………………………………..
………………………………………
The entire process includes 710 documents the installments, a need longer time (about 2 hours), please waits patiently, the final system automatic opens two times again, demonstrates greatly OK inscription, prompts installs successfully.
12. After again opens, system request disposition network
Are you ready to link this system to a network?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters y, the carriage return
13. The system inquires whether uses DHCP:
Do you wish to use DHCP to obtain networking information?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters n, the carriage return
14. The system inquires whether continues under main engine. Ip address. Time disposition:
*Your system name (host name)
*Your internet protocol (IP0 address.
*Your time zone
Are you wish to continue (answering no will HALT the system)?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters y, the carriage return
15. After that under the next picture two about to demonstrates:
Enter the system name, then press [ Return ].Just pressing [ Return ] will keep the (not recommended) name " unhost ": root
Inputs the systematic name in the cursor place which you wants, for example root then carriage return
Then the system inquires whether correct:
You have chosen root as the name for this system.
Is this correct?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters y, the carriage return
16. The screen requests the position which you chooses you is at:
1) North America or Hawaii
2) Central America
3) South America
4) Europe
5) Africa
6) Asia
7) Australia, New Zealand
Enter the number for your location (1-70then press [ return ]
Enters 6, chooses Asia, then carriage return
17. Receives requests the selecting time:
Select your time zone from the following list:
1) Western Russia 6) Phillipines, hongkong, Eastern China, Taiwan
2) India 7) Japan
3) Pakistan 8) Korea
9) Thailand 9) Unlisted time zone
5) Singapore 10) Previous menu
Enter the nunber for your tiiiiiime zone (1-10), then press [ Return ]
Enters 9, the carriage return continues
The system can inquire chooses whether correct:
Is this correct?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters y, the carriage return
18. Screen demonstration:
The current system time is --------------
Is this correct?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Looks system time is whether correct, if does not need to revise,
enters y, the carriage return
19. The system inquires whether wants to suppose root the secret cipher:
Do you want to set the root password at this time?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters y, the carriage return, the system prompt inputs the new secret cipher, enters the secret cipher, the carriage return continues
20. The system request inputs the IP address:
Enter your IP address, then press [ Return ] or just press [ Return ] to select
Default address:
Inputs the IP address, the carriage return, the screen appears:
You have chosen------as the IP address for this system,
Is this correct?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
If thinks input IP does not have the mistake,
enters y, the carriage return confirmation.
21. Screen appearance:
You may configure some additional network parameters at this time:
*Subnetwork Mask and Default Gateway
*Domain Name System (DNS)
*Network Information Service (NIS)
Do want to configure these additional network parameters?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters y, the carriage return
22. Receives the system asks whether has to establish sub- net covers code and gateway:
*Subnetwork mask
*Default gateway IP address
Do you wish to specify this information?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters y, the carriage return
23. Screen bottom line of appearance:
The subnetwork mask shown above is the system default value and possibly should be changed.Enter the new subnetwork mask, then press [ Return ] or just prss [ Return ] to use the default value above:
Inputs the sub- net which you wants covers the code, the carriage return
24. After that the system request input gateway:
Enter the gateway IP address, then press [ Return ]
Inputs the gateway, the carriage return
25. System inquiry a moment ago input whether correct:
Are the parameters above correct?
Press [ y ] for yes or [ n ] for no.or [ c ] to cancel, then press [ Return ]
Confirms unmistakable, enters y, after the carriage return, the system demonstrates: Are you continue?
After confirmation continuation, carriage return.
26. The system inquires whether carries on the DNS establishment:
To configure DNS you will need to known the:
*Local domain name
*DNS server IP address
Do you wish to specify this information?
Press [ y ] for yes or [ n ] for no, then press [ Return ]
Enters n, the carriage return.
27. The system inquires whether establishes:
Do you wish to specify NIS client information?
Press [ y ] for yes or [ n ] for no.then press [ Return ]
Enters n, the carriage return.
28. Appears Press in the screen [ Return ] to continue... When, the carriage return continues.
29. After that appears Press again [ Return ] to continue... When, the carriage return continues
30. This time screen has the advancement examination condition, then the user then might register systematically, installment conclusion.
31. Enters in SAM Disks and File System Fil system examines various documents system size and so on each kind of information is whether consistent with the request.
Mount Dir L2000 (MB) Usage
Primary swap xxx Swap+D
/ xxx VxcFs
/stand xxx HFS
/var xxx VxcFs
/usr xxx VxcFs
/Tmp xxx VxcFs
/Opt xxx VxcFs
/home xxx VxcFs
0 comments:
Post a Comment